Skip to main content

Kawai Kwok

Associate Professor

Department: Mechanical and Aerospace Engineering
Phone: 407-823-5747
Office: ENG 1 341
Website: Structures and Materials Design Lab
Resume: N/A

Kawai Kwok is an assistant professor of mechanical and aerospace engineering at the University of Central Florida. He received his B.S. in mechanical engineering from Lehigh University, and earned his M.S. and Ph.D. degrees in aerospace engineering from the California Institute of Technology. Prior to joining UCF, he was a research scientist in the Department of Energy Conversion and Storage at the Technical University of Denmark. His research interest lies in the mechanics of flexible and multifunctional structures and materials, focusing on shape reconfiguration, actuation and sensing, structural instability, and microstructural mechanisms.

Research Interests: Mechanics of structures and materials, deployable structures, flexible composites, high-temperature ceramics, instability and micromechanics modeling.

  • Associate Professor
  • Haugen, L. Aguilera, K. Kwok, T.T. Molla, K. Andersen, S. Pirou, A. Kaiser, P.V. Hendriksen, R. Kiebach (2018), Exploring the processing of tubular chromite-and zirconia-based oxygen transport membranes, Ceramics 1: 229-245

  • T.T. Molla, F. Greco, K. Kwok, P. Zielke, H.L. Frandsen (2018), Development of high temperature mechanical rig for characterizing the viscoplastic properties of alloys used in solid oxide fuel cells, Journal of Testing and Evaluation 46: 5.

  • Kiebach, P. Zielke, S. Veltzé, Y. Xu, S. Ovtar, S.B. Simonsen, K. Kwok, H.L. Frandsen, R. Kungas (2017), On the properties and long-term stability of infiltrated solid oxide fuel cell cathodes, Journal of the Electrochemical Society 164: F748-F758

  • T.T. Molla, K. Kwok, H.L. Frandsen (2017), Transient deformational properties of high temperature alloys used in solid oxide fuel cell stacks, Journal of Power Sources 351: 8-16.

  • Kwok, S. Pellegrino (2017), Micromechanics models for viscoelastic plain-weave composite tape springs, AIAA Journal 55: 309-321.

  • T.T. Molla, K. Kwok, H.L. Frandsen (2016), Efficient modeling of metallic interconnects for thermo-mechanical simulation of SOFC stacks: homogenized behaviors and effect of contact, International Journal of Hydrogen Energy 41: 6433-6444.

  • Ni, B. Charlas, K. Kwok, T.T. Molla, H.L. Frandsen (2016), Influence of temperature and atmosphere on the strength and elastic modulus of solid oxide fuel cell anode supports, Journal of Power Sources 311: 1-12.

  • Li, K. Kwok, S. Pellegrino (2016), Thermoviscoelastic models for polyethylene thin films, Mechanics of Time-Dependent Materials 20: 13-43.