Publication

Google Scholar Site

Journal papers


  1. Zhou, Q., Song, S., Chen, Q., Bai, Y., “Numerical and analytical studies on hot compaction and vibration assisted compaction tests of aluminum powder”. ASME Journal of Manufacturing Science and Engineering, Accepted for publication, August 2020.
  2. Zhou, L., Hyer, H., Sharon, P., Song, S, Bai, Y., Sohn, Y., ” Laser powder bed fusion of Al – 10 wt.% Ce alloys: microstructure and tensile property “, Journal of Materials Science, 2020 Oct; 55(29):14611-25.
  3. He, X., Song, S., Luo, X., Liu, J., An, L., Bai. Y., “Predicting ductility of Mg/SiCp nanocomposite under multiaxial loading conditions based on unit cell modeling”, International Journal of Mechanical Science, Volume 184, 15 October 2020, 105831.
  4. Ghazali, S., Algarni, M., Choi, Y., Bai, Y., “Study on the plasticity and fracture of AISI 4340 steel under different loading conditions and considering heat treatment effects”, International Journal of Fracture, 2020 Sept; 225 (1), 69-87.
  5. Yu, T., Hyer, H., Sohn, Y., Bai, Y., Wu, D., ” Structure-property relationship in high strength and lightweight AlSi10Mg microlattices fabricated by selective laser melting”, Materials and Design, 182 (2019) 108062.
  6. Yu, T., Zhang, Z., Song, S., Bai, Y., Wu, D., “Tensile and flexural behaviors of additively manufactured continuous carbon fiber-reinforced polymer composites”, Composite Structures, 225 (2019) 111147.
  7. Zhou, L., Hyer, H., Sharon, P., Pan, H., Bai, Y., Rice, K., Sohn, Y., “Microstructure and Mechanical Properties of Zr-modified Aluminum Alloy 5083 Manufactured by Laser Powder Bed Fusion”, Additive Manufacturing, 28 (2019), 485-496.
  8. Liang, W., He, X., Reddy, N.R., Bai, Y., An, L., Fang, J., “Morphology Transformation of Supramolecular Structures in Aqueous Mixtures of Two Oppositely Charged Amphiphiles”, Langmuir (ACS publications), 2019, 35, 9004-9010.
  9. Xiao, X., Pan, H., Bai, Y., Lou, Y., Chen, L., “Application of the modified Mohr–Coulomb fracture criterion in predicting the ballistic resistance of 2024-T351 aluminum alloy plates impacted by blunt projectiles”, International Journal of Impact Engineering, vol. 123 (2019) 26-37.
  10. Zhou, L., Pan, H., Hyer, H., Park, S., Bai, Y., McWilliams, B., Cho, K., Sohn, Y.H., “Microstructure and Tensile Property of a Novel Al-Zn-Mg-Sc-Zr Alloy Additively Manufactured by Gas Atomization and Laser Powder Bed Fusion,” Scripta Materialia, Vol. 158 (2019) 24-28.
  11. Qiao, Y., Bai, Y., “A Review on Failure Modeling Methods of Fiber Reinforced Polymer Matrix Composites”, Journal of Automotive Safety and Energy, December, 2018, 9(1):1-10.
  12. Liang, K., Marcus, K., Yang, Z., Zhou, L., Pan, H., Bai, Y., Du, Y., Engelhard, M., Yang, Y., “Freestanding NiFe Oxyfluoride Holey Film with Ultrahigh Volumetric Capacitance for Flexible Asymmetric Supercapacitors, Small, 2018, 14(3).
  13. Norfleet, J., Stern, E., Bai, Y., “Tissue Performance Characteristics: Closing the Fidelity Gap in Medical Simulations”, Journal of Trauma & Treatment, 2017, 6(3).
  14. Jia, Y., Qiao, Y., Maung, A., Argueta-Morales, R., Norfleet, J., Bai, Y., Divo, E., Kassab, A.J., DeCampli, W.M, “Experimental Study of Anisotropic Stress/Strain Relationships of the Human Great Vessels”, ASME Journal of Biomechanical Engineering, 139(10), 101003, October 2017.
  15. Qiao, Y., Bisagni, C., Bai, Y., “Experimental investigation and numerical simulation of unidirectional carbon fiber composite under multi-axial loading”, Composites Part B: Engineering, September 2017, 124: 190-206.
  16. Qiao, Y., Liu, J., Jia, Y., Xu, C., An, L., Bai, Y., “Study on Coexistence of Brittle and Ductile Fractures in Nano Reinforcement Composites under Different Loading Conditions”, International Journal of Fracture, 2017, 204 (2): 205-224
  17. Algarni, M., Choi, Y., Bai, Y., “A unified material model for multiaxial ductile fracture and extremely low cycle fatigue of Inconel 718”, International Journal of Fatigue, 2017, 96: 162-177.
  18. Jia, Y., Bai, Y., “Ductile fracture prediction for metal sheets using all-strain-based modified Mohr-Coulomb model”, International Journal of Mechanical Sciences, 2016, 115: 516–531.
  19. Pan, H., Liu, J., Choi, Y., Xu, C., Bai, Y., and Atkins, A.G., “Zones of material separation in simulations of cutting”, International Journal of Mechanical Sciences, 2016, 115: 262-279.
  20. Shabahang, S., Tao, G., Kaufman, J., Qiao, Y., Wei, L., Bouchenot, T., Gordon, A., Fink, Y., Bai, Y., Hoy, R., and Abouraddy, A., “Controlled fragmentation of multimaterial fibers and films via polymer cold-drawing”, Nature, June, 2016.
  21. Jia, Y., Bai, Y, “Experimental Study of the Mechanical Properties in AZ31B-H24 Magnesium Alloy Sheets under Various Loading Conditions”, International Journal of Fracture, January 2016, 197(1): 25-48.
  22. Long, X., Bai, Y., Alagrni, M., Choi, Y., Chen, Q., “Study on the Hardening Mechanisms of Cu/CNT Nano Composites”, Materials Science and Engineering: A, October 2015, 645:347-356.
  23. Algarni, M., Bai, Y., Choi, Y. “A study of Inconel 718 dependency on stress triaxiality and Lode angle in plastic deformation and ductile fracture”, Engineering Fracture Mechanics, 2015, 147:140-157
  24. Bai, Y., Wierzicki, T., “A comparative study of 3D prediction of ductile fracture by three groups of models”, Engineering Fracture Mechanics, February 2015, 135:147-167.
  25. Jia, Y., Argueta-Morales, R., Liu, M., Bai, Y., Divo, E., Kassab, A.J., DeCampli, W.M, “Experimental Study of Anisotropic Stress/Strain Relationships of the Piglet Great Vessels and Relevance to Pediatric Congenital Heart Disease”, The Annals of Thoracic Surgery, 99(4): 1399–1407, April 2015.
  26. Liu, J., Bai, Y., and Xu, C., “Evaluation of Ductile Fracture Models on Finite Element Simulation of Metal Cutting Process”, Journal of Manufacturing Science and Engineering (ASME Transaction), 136:011010 (14 pages), February 2014.
  27. Kraft, S.M., Moslehy, F., Bai, Y., and Gordon, A.P., “Characterization of the Orthotropic Elastic Constants of a Micronic Woven Wire Mesh via Digital Image Correlation”, Experimental Mechanics, April 2014, 54(4): 501-514.
  28. Jia, Y., Long, X., and Bai, Y., “Experimental study on mechanical properties of AZ31B-H24 magnesium alloy sheets under multi-axial loading conditions”, Journal of Automotive Safety and Energy, December, 2012, 3(4):390-400.
  29. Bai, Y., Atkins, A.G., “Tension and Shear Cracking During Indentation of Ductile Materials by Opposed Wedges”, Engineering Fracture Mechanics, 2012, 96:49-60.
  30. Bai, Y., Wierzbicki, T. “Application of Extended Mohr-Coulomb Criterion to Ductile Fracture”, International Journal of Fracture, January 2010, 161(1):1-20.
  31. Beese, A. M., Luo M., Li, Y., Bai, Y., Wierzbicki, T, “Partially coupled anisotropic fracture model for aluminum sheets”, Engineering Fracture Mechanics, 2010, 77(7):1128-1152.
  32. Bai, Y., Teng, X., and Wierzbicki, T., “On the application of stress triaxiality formula for plane strain fracture testing”, Journal of Engineering Materials and Technology (ASME Transaction), April 2009, 131(2): 021002 (10 pages).
  33. Bai, Y., and Wierzbicki, T., “Forming Severity Concept for Predicting Sheet Necking under Complex Loading Histories”, International Journal of Mechanical Sciences, 2008, 50(6):1012-1022.
  34. Bai, Y., Wierzbicki, T., “A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence”, International Journal of Plasticity, 2008, 24(6):1071-1096.
  35. Teng, X., Mae, H., Bai, Y., and Wierzbicki, T., “Pore Size and Fracture Ductility of Aluminum Low Pressure Die Casting”, Engineering Fracture Mechanics, 2009, 76(8):983-996.
  36. Teng, X., Mae, H., Bai, Y., and Wierzbicki, T., “Statistical Analysis of Ductile Fracture Properties of an Aluminum Casting”, Engineering Fracture Mechanics, 2008, 75(15):4610-4625.
  37. Mae, H., Teng, X., Bai, Y. and Wierzbicki, T., “Comparison of Ductile Fracture Properties of Aluminum Castings: Sand Mold vs. Metal Mold”, International Journal of Solids and Structures, 2008, 45(5):1430-1444.
  38. Mae, H., Teng, X., Bai, Y. and Wierzbicki, T., “Calibration of Ductile Fracture Properties of a Cast Aluminum Alloy”, Materials Science and Engineering: A, June 2007, 459(1-2):156-166.
  39. Bai, Y., Bao, Y. and Wierzbicki, T., “Fracture of prismatic aluminum tubes under reverse straining”, International Journal of Impact Engineering, 2006, 32(5):671-701.
  40. Wierzbicki, T., Bao, Y., Lee, Y., and Bai, Y., “Calibration and evaluation of seven fracture models”, International Journal of Mechanical Sciences, 2005, 47(4-5):719-743.
  41. Zhang, J., Ma, C., Bai, Y., and Huang, S., “Airbag mapped mesh auto-flattening method”, Tsinghua Science & Technology, Jun. 2005: 387-390.
  42. Ma, C., Huang, S., Zhang, J., and Bai, Y., “Research on Injury Criterions Prescribed in Automotive Frontal Crash Regulations”, Journal of Highway and Transportation Research and Development, 2004(01):96-99.
  43. Bai, Y., Zhang, J. and Huang, S., “Mapping algorithm for airbag modeling with initial metric method”, Journal of Tsinghua University (Sci & Tech), Nov. 2002.

Conference papers


  1. Jia, Y., Qiao, Y., Pan, H., Chu, E., Bai, Y., “A Comprehensive Plasticity and Fracture Model for Metal Sheets under Multi-axial Stress and Non-Linear Strain Path”, SAE International Journal of Engines 10 (#2017-01-0315), Presented on SAE 2017 Conference, Detroit, MI, April 4-6, 2017.
  2. Jia, Y., Wang, Y., Bai, Y, “A New Combined Isotropic, Kinematic and Cross Hardening Model for Advanced High Strength Steel under Non-Linear Strain Loading Path”, SAE International Journal of Engines 10 (#2017-01-0367), Presented on SAE 2017 Conference, Detroit, MI, April 4-6, 2017.
  3. Algarni, M., Bai, Y., “Extremely Low Cycle Fatigue Damage Mechanism, Fractographic Examination, and Life Prediction”, Materials Science and Technology 2016 (MS&T16) Conference Symposium, Salt Lake City, UT, Oct. 23-27, 2016.
  4. Jia, Y., Bai, Y., “A Combined Isotropic, Kinematic and Cross Hardening Model for Magnesium AZ31B-H24 under Non-linear Strain Loading Path”, Proceedings of Numisheet 2016, Brisol, UK, Sep. 4-9, 2016.
  5. Jia, Y., Ghazali, S., Bai, Y., “Application of eMMC Model to Fracture of Metal Sheets”, Proceedings of the 2016 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Orlando FL, 2016.
  6. Qiao, Y, Jia, Y, Argueta-Morales, R, Kassab AJ, Bai, Y, DeCampli, WM. Experimental Study of Anisotropic Mechanical Properties of Human Tissues with Application to Congenital Heart Disease. World J Pediatr Congenit Heart Surg. 2016;7(2):283-284.
  7. Jia, Y., Bai, Y., “A Combined Isotropic, Kinematic and Cross Hardening Model for BH240 and DP600 Steel Sheets”, International Deep-Drawing Research Group (IDDRG 2015), May 31 – June 3, 2015, Shanghai, China.
  8. Jia, Y., Bai, Y., Ma. C., Zhang, J., “Ductile fracture prediction for metal sheets using all-strain-based modified Mohr-Coulomb model”, International Deep-Drawing Research Group (IDDRG 2015), May 31 – June 3, 2015, Shanghai, China.
  9. Algarni, M.S., Jia, Y., Karl, J., Gordon, A.P., Bai, Y., “Linkage Between Ductile Fracture And Extremely Low Cycle Fatigue Of Inconel 718 Under Multiaxial Loading Conditions”, TMS2015, Supplemental UE: TMS 2015 Conference Proceedings, March 15-19, 2015, Orlando, FL.
  10. Hu, Y., Wu, T., Chow, L., Bai, Y., Wu, W., “Design of a 3kW 150k RPM Super High-Speed Permanent Magnet Synchronous Motor”, ICEM2014, The XXIth International Conference on Electrical Machines, September 2-5, 2014, Berlin, Germany.
  11. Jia, Y, Bai, Y.; Muralidharan, G., Muth, T. R. and Wang, Y., “Evaluation of Fracture Criteria of Mg-Alloy Sheets during Formability Testing”, TMS2014, 143rd Annual meeting and exhibition, February 16-20, 2014, San Diego, California.
  12. Jia, Y, Argueta-Morales, R, Liu, M, Kassab AJ, Divo, E, Bai, Y, DeCampli, WM. Experimental Study of Anisotropic Stress/Strain Relationships of the Piglet Great Vessels and Relevance to Congenital Heart Disease. World J Pediatr Congenit Heart Surg. 2014;5(1):178-79.
  13. Liu, J., Bai, Y., Xu, C., “Evaluation of Ductile Fracture Models on Finite Element Simulation of Metal Cutting Process”, Proceeding of the 2013 ASME International Manufacturing Science and Engineering Conference (MSEC2013), June 10-14, 2013, Madison, Wisconsin.
  14. Bai, Y., Wierzbicki, T., “The Concept Of Damage Accumulation For Predicting Necking And Fracture Of Sheets”, International Deep-Drawing Research Group (IDDRG 2013), June 2 – 5, 2013, Zurich, Switzerland.
  15. Jia, Y., Long, X., Wang, K., and Bai, Y., “Calibration of Plasticity and Fracture of Magnesium Alloy Sheets Under Multi-Axial Loading Conditions”, Plasticity 2013, Nassau, Bahamas, Jan. 3-8, 2013.
  16. Liu, H., Brokaw, W., Harms, J., Wu, W., Epstein, M., Chalfant, T., Camarano, A., Hu, Y., Bai, Y., Chow L., and Wu, T., “Design and Optimization of Permanent Magnet Switch Reluctance Machine for Renewable Energy Application”, International Conference on. Electrical Machines (ICEM2012), Marseille, France, Sept. 2-5, 2012, Accepted.
  17. Bai, Y., “Fracture of 1045 Steel under Complex Loading History”, Proceedings of Numisheet 2011, Seoul, Korea, Aug. 21-26, 2011.
  18. Bai, Y., Wierzbicki T., “Analytical Solution on the Failure of Strips under Bending and Tension”, Proceedings of Numisheet 2011, Seoul, Korea, Aug. 21-26, 2011.
  19. Bai, Y., Wierzbicki, T., “Predicting Fracture of AHSS Sheets on the Punch and Die Radii and Sidewall”, Proceedings of Numisheet 2008, Interlaken, Switzerland, Sept. 1-5, 2008.
  20. Kim, K., Bai, Y., and Wierzbicki, T., “Failure Characterization of TRIP780 and DP590 sheet steels”, International Deep Drawing Research Group (IDDRG 2009) International Conference, Jun. 1-3, 2009, Golden, CO, USA.
  21. Luo, M., Beese, A.M., Li, Y., Bai, Y., Wierzbicki, T., “Ductile Fracture Calibration and Prediction of Anisotropic Aluminum Sheets”, To be published on the Proceedings of the 2009 SEM Annual Conference and Exposition on Experimental and Applied Mechanics.
  22. Wierzbicki, T., Beese, A., and Bai, Y., “A Comparative Study of Three Methods of Measuring Fracture Strain in Metals”, Proceedings of Plasticity 2008, The Fourteenth International Symposium on Plasticity and its Current Applications, Hawaii.
  23. Mae, H., Teng, X., Bai, Y. and Wierzbicki, T. , “Calibration of Ductile Fracture Properties of Two Cast Aluminum Alloys”, Experimental Analysis of Nano and Engineering Materials and Structures, Proceedings of the 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, July 1–6, 2007.
  24. Wierzbicki, T., Bao, Y., and Bai, Y., “A new experimental technique for constructing a fracture envelope of metals under multi-axial loading”, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2005, 1295-1303.
  25. Bai, Y., Huang, S., and Zhang, J., “Study on soil modeling under impact”, Proceedings of the 7th CSAE conference of vehicle impact safety, Beijing, China, 2002.