Publications

(5) Books, Book Chapters

  • Boron Rich Solids: Sensors, Ultra High Temperature Ceramics, Thermoelectrics, Armor, Eds. Orlovskaya, N., Lugovy, M., Springer, pp.316, 2010.
  • Thomas, E.L., McGrath, M.F., Buchanan, R.C., Chelluri, B., Haber, R.A., Hutchinson, J.W., Johnson, G.R., Kumar, S., McMeeking, R.M., Orlovskaya, N.A., Ortiz, M., Radovitzky, R., Ramesh, K.T., Shockey, D.A., Skaggs, S.R., Wax, S.G., Opportunities in protection materials science and technology for future army applications, the National Academies Press, Washington, D.C., 2011.
  • Orlovskaya, N., Lugovy, M., Slyunyayev, V., Kuebler, J., Control of thermal residual stresses, in: Encyclopedia of Thermal Stresses, Editor R.B. Hetnarski, Springer, 727-733, 2014.
  • Orlovskaya, N., Lugovy, M., Kuebler, J., Yarmolenko, S., Sankar, J., Design of tough ceramic laminates by residual stresses control, Chapter 7 in: Ceramic Matrix Composites: Microstructure/Property Relationship, editor I.M. Low, Woodhead Publishing Ltd, Cambridge, pp. 178-215, 2006.
  • Mixed Ionic Electronic Conducting Perovskites for Advanced Energy Systems, Eds. N.Orlovskaya, N. Browning, Kluwer Academic Publishers, pp.315, 2004.

(88) Papers

  •  Xie*, Z., Terracciano*, A., Cullen, D.A., Blair, R., Orlovskaya, N., A search for an elusive IrB2: Can mechanochemistry help?, in preparation to submission to Advances in Applied Ceramics, 2014.
  • Xie*, Z., Terracciano*, Cullen, D.A., Blair, R., Orlovskaya, N., Effect of annealing on Ir segregation in Ir-B ceramic powder synthesized by mechanochemistry, submitted to Advances in Applied Ceramics, 2014.
  • Xie*, Z., Lugovy, M., Orlovskaya, N., Graule, T., Kuebler, J., Mueller, M., Gao, H., Radovic, M., Cullen, D.A., Hexagonal OsB2: Sintering, microstructure and mechanical properties, submitted to J. Alloys and Compounds, 2014.
  • Xie, Z., Cullen, D.A., Blair, R., Orlovskaya, N., Stability and thermal properties of OsB2 powder synthesized by mechanochemistry, in preparation to submission to Advances in Applied Ceramics, 2014.
  • Chen*, Y., Orlovskaya, N., Payzant, A., Graule, T., Kuebler, J., A search for temperature induced time dependent structural transitions in 10mol%Sc2O3-1mol%CeO2-ZrO2 and 8mol%Y2O3-ZrO2 electrolyte ceramics, J.Europ.Ceram.Soc., in print, 2014. Impact factor 2.36
  • Aman*, A., Chen*, Y., Lugovy, M., Orlovskaya, N., Ma, D., Stoica, A., An, K., Graule, T., Kuebler, J., In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression: Part II. Elastic properties, J.Appl.Phys., 116, 1, 013504, 2014. Impact factor 2.21
  • Aman*, A., Chen*, Y., Lugovy, M., Orlovskaya, N., Ma, D., Stoica, A., An, K., In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression: Part I. Crystal structure analysis and texture development, J.Appl.Phys., 116, 1, 013503, 2014. Impact factor 2.21
  • Robayo*, M.D., Beaman**, B., Hughes**, B., Delose**, B., Orlovskaya, N., Chen, R.-H., Perovskite catalysts enhanced combustion on porous media, Energy, 76, 477-486, 2014. Impact factor 3.651
  • Xie*, Z., Blair, R., Orlovskaya, N., Cullen, D., Payzant, E.A., Thermal stability of hexagonal OsB2, J. Solid State Chemistry, 219, 01, 210–219, 2014.
  • Xie*, Z., Blair, R.G., Orlovskaya. N., Payzant, E.A., Hexagonal OsB2 reduction upon heating in H2 containing environment, Advances in Applied Ceramics, in press, 2014 DOI: 10.1179/1743676114Y.0000000212. Impact factor 1.168
  • Lugovy M., Orlovskaya, N., Neubert, M., Aneziris, C.G., Graule, T., Kuebler, J., Time dependent mechanical properties of ZrB2-SiC ceramic composites: Room temperature fatigue parameters, Science of Advanced Materials, 6, 844-852(9), 2014. Impact factor 2.51
  • Xie*, Z., Graule**, M., Orlovskaya, N., Payzant, A., Cullen, D., Blair, R., Novel high pressure hexagonal OsB2 by mechanochemistry, J. Solid State Chem., 215, 16-21, 2014. Impact factor 2.04
  • Bubnovich, V.I., Orlovskaya, N., Henraquez-Vargas, L.A., Ibacache, F.E.,  Experimental thermoelectric generation in a porous media burner, International Journal of Chemical Engineering and Applications, 4, 5, 301-304, 2013. Impact factor: Evaluation Pending
  • Lugovy M., Orlovskaya, N., Neubert, M., Aneziris, C.G., Graule, T., Kuebler, J., Mechanical Properties of ZrB2-SiC ceramic composites: Room Temperature Fatigue, Ceram. Int., 39, 9187–9194, 2013. Impact factor 1.789
  • Mueller*, K. T., Waters**, O., Bubnovich, V., Orlovskaya, N., Chen, R.-H., Super-adiabatic combustion in Al2O3 and SiC coated porous media for thermoelectric power conversion, Energy, 56, 108-116, 2013. Impact factor 3.651
  • Chen*, Y., Aman*, A., Lugovy, M., Orlovskaya, N., Wang, S., Huang, X., Graule, T., Kuebler, J., Residual Stress and Biaxial Strength in Sc2O3-CeO2-ZrO2/Y2O3-ZrO2 Layered Electrolytes, Fuel Cells, 13, 1068-1075, 2013. Impact factor 2.364
  • Orlovskaya, N., Stadelmann*, R., Lugovy, M., Subbotin, V., Subhash, G., Neubert, M., Aneziris, C.G., Graule, T., Kubler, Mechanical properties of ZrB2-SiC ceramic composites: Room temperature instantaneous behaviour, Adv. Appl. Ceram., 112, 9-16, 2013. Impact factor 0.688
  • Chen*, Y., Orlovskaya, N., Graule, T., Kuebler, J., Microstructure and mechanical properties of Ni/(Sc2O3)0.1(CeO2)0.01(ZrO2)0.89 cermet anode for Solid Oxide Fuel Cells, J. Europ. Ceram. Soc., 33, 557-564, 2013. Impact factor 2.36
  • Restrepo, D., Hick, S.M., Griebel, C., Alarcon, J., Giesler, K., Chen*, Y., Orlovskaya, N., R.G. Blair, Size controlled mechanochemical synthesis of ZrSi2, Chemical Communications, 49, 707-709, 2013. Impact factor 6.378
  • Rohrer, G., Affatigato, M., Backhaus-Ricoult, M., Bordia, R., Chan, H., Curtarolo, S., Demkov, A., Ekstein, J., Faber, K., Garay, J., Gogotsi, Y., Huang, L., Jones, L., Kalinin, S., Lad, R., Levi, C., Levy, J., Maria, J.-P., Mattos, Jr., L., Navrotsky, A., Orlovskaya, N., Pantano, C., Stebbins, J., Sudarshan, T.S., Tani, T., Weil, K., Challenges in Ceramic Science: A report from the workshop on emerging research areas in ceramic science, J. Am. Ceram. Soc., 95, 3699-3712, 2012.
  • Fist**, N., Dinan**, J., Stadelmann*, R., Orlovskaya, N., In situ three point bending device for measurements of vibrational response of ceramics under stress by micro Raman spectroscopy, Adv. Appl. Ceram., 111, 433-439, 2012.
  • Chen*, Y., Orlovskaya, N., Klimov, M., Huang, X., Cullen, D., Graule, T., Kuebler, J., Layered YSZ/SCSZ/YSZ electrolytes for Intermediate Temperature SOFC: Part I: Design and manufacturing, Fuel Cells, 12, 722–731, 2012.
  •  Orlovskaya, N., Xie*, Z., Klimov, M., Heinrich, H., Restrepo, D., Blair, R., Surynarayana, C., Mechanochemical synthesis of ReB2 powder, J. Mat. Res., 26, 21, 2772-2779, 2011.
  • Orlovskaya, N., Chen*, Y., Miller, N., Abernathy, H., Haynes, D., Tucker, D., Gemmen, R., Glycine – nitrate synthesis of Sr doped La2Zr2O7 pyrochlore powder, Advances in Applied Ceramics,  110, 1, 54-57, 2011.
  • Lugovy, M., Slyunyayaev, V., Yarmolenko, S., Sankar, J., Graule, T., Kuebler, J., Nicholson, D., Orlovskaya, N., A further insight into the spherical indentation: A ring crack formation in a brittle La0.8Sr0.2Ga0.8Mg0.2O3 perovskite, Acta Materialia, 59, 11, 4425-4436, 2011.
  • Lugovy, M., Slyunyayev, V., Subbotin, V., Liang, F., Gou, J., Orlovskaya, N., Graule, T., Kuebler, J., Mechanical behavior and failure mechanisms of boron carbide based three layered laminates with weak interfaces, Ceram. Int., 37, 2255-2261, 2011.
  • Lukich*, S., Carpenter**, C., Orlovskaya, N., Temperature and stress induced changes of the vibrational response of cubic and rhombohedral 10 mol%Sc2O3-1 mol%CeO2-ZrO2 ceramics, J. Power Sources, 195, 8, 2301-2309, 2010.
  • Orlovskaya, N., Lukich*, S., Subhash, G., Graule, T., Kuebler, J., Mechanical properties of 10 mol%Sc2O3-1 mol%CeO2-ZrO2 ceramics, J. Power Sources, 195, 9, 2774-2781, 2010.
  • Lugovy, M., Slyunyayev, V., Orlovskaya, N., An ultimate state of layered cantilever sensors under bending: a simplified evaluation, Mechanics of Advanced Materials and Structure, 17, 4, 280-286, 2010.
  • Ghosh, D., Subhash, G., Orlovskaya, N., Slip-line spacing in ZrB2-based ultrahigh temperature ceramics, Scripta Mater., 62, 11, 839-842, 2010.
  • Pathak, S., Kuebler, J., Payzant, A., Orlovskaya, N., Mechanical behavior of La1-xCaxCoO3 perovskites as a function of Ca doping, J. Power Sources, 195, 3612-3620, 2010.
  • Viola, G., Verbulo, D., Orlovskaya, N., Reece, M.J., Time dependent behavior of ferroelectric/ferroelastic perovskites, Mater. Sci. Tech., 25, 11, 1312-1315, 2009.
  • Gangopadhayay, S., Inerbaev, T., Masunov, A., Altilio*, D., Orlovskaya, N., Structural characterization combined with the first principles simulations of barium/strontium cobaltite/ferrire as promising material for Solid Oxide Fuel Cells cathodes and high temperature oxygen permeation membranes, ACS Applied Materials and Interfaces, 1, 7, 1512-1519, 2009.
  • Jiang, T., Wang, Y., Wang, Y., Orlovskaya, N., An, L., Quantitative Raman analysis of free carbons in polymer-derived ceramics, J. Am. Ceram. Soc., 92, 10, 2455-2458, 2009.
  • Johnson, C., Orlovskaya, N., Coratolo, A., Cross, C., Wu, J., Gemmen, R., Liu, X., The effect of coating crystallization and substrate impurities on magnetron sputtered doped LaCrO3 coatings for metallic solid oxide fuel cell interconnects, Int. Journal of Hydrogen Energy, 34, 5, 2408-2415, 2009.
  • Yarmolenko, S., Sankar, J., Bernier**, N., Klimov, M., Kapat, J., Orlovskaya, N., Phase stability and sintering behavior of 10mol% Sc2O3-1mol%CeO2-ZrO2, Journal of Fuel Cells Science and Technology, 6, 2, 021007, 2009.
  • Orlovskaya, N., Lugovy, M., Carpenter**, C., Pathak, S., Steinmetz, D., Lara-Curcio, E., Klemenz,C., Radovic, M., On thermal and vibrational properties of LaGaO3 single crystals, Acta Materialia, 57, 2984-2992, 2009.
  • Orlovskaya, N., Lugovy, M., Verbulo, D., Reece, M.J., Dual ferroelasticity of lanthanum chromium-based multicomponent solid solution perovskite, Scripta Materialia, 60, 9, 783-786, 2009.
  • Pathak, S., Steinmetz, D., Kuebler, J., Payzant, A., Orlovskaya, N., Mechanical behavior of La0.8Sr0.2Ga0.8Mg0.2O3 perovskites, Ceram. International, 35, 3, 1235-1241, 2009.
  • Lugovy, M., Slyunyayev, V., Orlovskaya, N., Verbylo, D., Reece, M., Room temperature creep of LaCoO3 based perovskites: equilibrium strain under compression, Phys. Rev. B, 78, 024107, 2008.
  • Radovic, M., Speakman, S.A., Allard, L.F., Payzant, E.A., Lara-Curzio, E., Kriven,W., Lloyd, J., Fegely, L., Orlovskaya, N., Thermal properties and structural stability of LaCoO3 in reducing and oxidizing environments, J. Power Sources, 184, 1, 77-83 2008.
  • Ghosh, D., Subhash, G., Orlovskaya, N., Scratch-induced residual stress measurements within SiC particles in a ZrB2 – SiC composite using micro-Raman spectroscopy, Acta Mater., 56, 5345-5354, 2008.
  • Orlovskaya, N., Lugovy, M., Kuebler, J., Yarmolenko, S., Sankar, J., Effect of rolling and hot pressing on mechanical properties of boron carbide based ceramics, J. Mater. Sci., 43, 17, 5942-5947, 2008.
  • Orlovskaya, N., Lugovy, M., Pathak, S., Steinmetz, D., Lloyd, J., Fegely, L., Radovic, M., Payzant, E.A., Lara-Curzio, E., Allard, L., Kuebler, J., Thermal and mechanical properties of LaCoO3 and La0.8Ca0.2CoO3 perovskites, J. Power Sources, 182, 230-239, 2008.
  • Pathak, S., Kalidindi, S., Klemenz, C., Orlovskaya, N., Analyzing indentation behavior of LaGaO3 single crystals using spherical indentation stress-strain curves, J. European Ceramic Society, 28, 11, 2213-2220, 2008.
  • Pathak, S., Kalidindi, S., Moser, B., Klemenz, C., Orlovskaya, N., Analyzing indentation behavior of LaGaO3 single crystals using sharp indenters, J. European Ceramic Society, 28, 10, 2039-2047, 2008.
  • Lugovy, M., Coratolo, A., Orlovskaya, N., Johnson, C., Gemmen, R., Structural evolution of La-Cr-O thin films: Part II. Elasto-plastic properties by nanoindentation, Thin Solid Films, 515, 2847-2853, 2007.
  • Kuebler, J., Blugan, G., Lugovy, M., Slyunyayev, V., Orlovskaya, N., Dobedoe, R., Development of failure tolerant multilayer silicon nitride ceramics: Review from macro to micro layered structures, Key Engineering Materials, 333, 117-126, 2007.
  • Chi, M., Browning, N., Orlovskaya, N., Microstructural evolution of protective La-Cr-O films studied by Transmission Electron Microscopy, J. Solid State Electrochemistry, 10, 659-662, 2006.
  • Orlovskaya, N., Anderson, H., Brodnikovskyy, M., Lugovy, M., Reece, M., Inelastic deformation behaviour of La0.6Sr0.4FeO3 perovskite, J. Appl. Phys., 100, 026102, 2006.
  • Orlovskaya, N., Coratolo, A., Lugovy, M., Johnson, C., Gemmen, R., Structural evolution of La-Cr-O thin films: Part I. Microstructure and phase development, Thin Solid Films, 515, 1741-1747, 2006.
  • Orlovskaya, N., Lugovy, M., Ko, F., S. Yarmolenko, J. Sankar, Kuebler, J., SiC/SiCwoven fabric laminates: Design, manufacturing, mechanical properties, Composites Part B Engineering, 27, 6, 524-529, 2006.
  • Coratolo, A., Orlovskaya, N., Lugovy, M. Slyunayaev, V., Dub., S., Johnson, C., Gemmen, R., Nanoindentation of LaCrO3 thin film, J. Mat. Sci., 41, 10, 3105-3111, 2006.
  • Orlovskaya, N., Steinmetz, D., Yarmolenko, S., Pai, D., Sankar, J., Goodenough, J., Detection of temperature and stress induced modifications of LaCoO3 by micro-Raman spectroscopy, Phys. Rev. B, 72, 014122-1-7, 2005.
  • Orlovskaya, N., Lugovy, M., Subbotin, V., Radchenko, O., Adams, J., Chheda, M., Shih, J., Sankar, J., Yarmolenko, S., Robust design and manufacturing of ceramic laminates with controlled thermal residual stresses for enhanced toughness, J. Mat. Sci., 40, 5483-5490, 2005.
  • Orlovskaya, N., Kuebler, J., Subbotin, V., Lugovy, Design of Si3N4 based ceramic laminates by residual stresses, J. Mat. Sci., 40, 5443-5450, 2005.
  • Blugan, G., Dobedoe, R., Gee, I., Orlovskaya, N., Kuebler, J., Failure behavior of high toughness multilayer Si3N4 and Si3N4-TiN based laminates, Key Engineering Materials, 290, 175-182, 2005 .
  • Lugovy, M., Sljunyaev, V., Orlovskaya, N., Blugan, G., Kuebler, J., Lewis, M., Apparent fracture toughness of Si3N4 based laminates with residual compressive or tensile stresses in surface layers, Acta Mater., 53, 289-296, 2005.
  • Orlovskaya, N., Coratolo, A., Johnson, C., Gemmen, R., Characterization of LaCrO3 perovskite coating deposited by magnetron sputtering on an iron based chromium containing alloy, J. Am. Ceram. Soc., 87, 10, 1981-1987, 2004.
  • Blugan, G., Orlovskaya, N., Lewis, M., Kuebler, J., Multilayer silicon nitride laminates exhibiting high fracture toughness and crack deflection, Key Engineering Materials, 280-283, 1863-1868, 2004.
  • Lugovy, M., Slyunyayev, V., Subbotin, V., Orlovskaya, N., Gogotsi, G., Crack arrest in Si3N4-based layered composites with residual stress, Composites Science and Technology, 64, 13-14, 1947-1957, 2004.
  • Johnson, C., Gemmen, R., Orlovskaya, N., Nanostructured self-assembled LaCrO3 thin film deposited by RF magnetron sputtering on a stainless steel interconnect material, Composites, Part B: Engineering, 35, 2, 167-172, 2004.
  • Orlovskaya, N., Browning, N., Nicholls, A., Ferroelasticity in mixed conducting LaCoO3 based perovskites: A ferroelastic phase transition, Acta. Mater., 51, 17, 5063-5071, 2003.
  • Lugovy, M., Orlovskaya, N., Slyunayev, V., Gogotsi, G., Kuebler, J., Sanchez-Herencia, A., Crack bifurcation features in laminar specimens with fixed total thickness, Composite Science and Technology, 62, 819-830, 2002.
  • Orlovskaya, N., Gogotsi, Y., Reece, M., Cheng, B., Gibson, I., Ferroelasticity and hysteresis in LaCoO3 based perovskites, Acta Mater., 50, 4, 715-723, 2002.
  • Orlovskaya, N., Gogotsi, Y., Residual stresses in Si3N4 based ceramic laminates, Key Engineering Materials, 206-213, 1025-1028, 2002.
  • Orlovskaya, N., Ge, D., Nicholls, A., In-Situ TEM Study of high temperature stability of LaCoO3 based ferroic perovskites, Key Engineering Materials, 206-213, 2001.
  • Kleveland, K., Orlovskaya, N., Grande, T., Moe, A.-M., Einarsrud, M.-A., Breder, K., Gogotsi, G., Non-linear behavior of LaCoO3 perovskites, J. Am. Ceram. Soc., 84, 9, 2029-2033, 2001.
  • Orlovskaya, N., Gonzalez, N., Nonelastic ferroelastic behavior of LaCoO3 based ceramics under contact loading, J. Materials Processing and Manufacturing Science, 9, 53-63, 2000.
  • Orlovskaya, N., Kleveland, K., Grande, T., Einarsrud, M.-A., Mechanical properties of LaCoO3-based ceramics, J. Europ. Ceram. Soc., 20, 51-56, 2000.
  • Orlovskaja, N., Peterlik,H., Steinkellner, W., Kromp,K., Prediction of strength of recrystallized silicon carbide from pore sized measurement. Part I – The bimodality of the distribution, J. Mater. Sci., 35, 699-705, 2000. The spelling of Orlovskaya’s last name is different in this publication due to the translation from Russian language.
  • Peterlik, H., Orlovskaja,N., Steinkellner, W., Kromp,K., Prediction of strength of recrystallized silicon carbide from pore sized measurement. Part II – The reliability of the prediction, J. Mater. Sci., 35, 699-705, 2000. The spelling of Orlovskaya’s last name is different in this publication due to the translation from Russian language.
  • Lugovoj, N., Orlovskaya, N., Berroth, K., Kuebler, J., Macrostructural engineering of ceramic-matrix layered composites, Composite Science and Technology, 59, 8, 1429-1437, 1999.
  • Lugovoj, N., Orlovskaya, N., Berroth, K., Kuebler, J., Microstructural engineering of ceramic-matrix layered composites: Effect of grain size dispersion on single-phase ceramic strength, Composite Science and Technology, 59, 2, 283-289, 1999.
  • Ostrovoj, D., Orlovskaya, N., Kovylayev, V., Firstov, S., Mechanical properties of toughened Al2O3-ZrO2- TiN ceramics, J. Europ. Ceram. Soc., 18, 381-388, 1998.
  • Orlovskaja N, Peterlik H., Marczewski M., Kromp K. The validity of Weibull estimators – experimental verification, J. Mat. Sci., 3, 978-983, 1997. The spelling of Orlovskaya’s last name is different in this publication due to the translation from Russian language.
  • Yaroshenko, V., Orlovskaya, N., Einarsrud, M.-A., Berroth, K., Kovylayev, V., Laminar Si3N4-TiN hot-pressed ceramic composites, Euro Ceramics 3, Key Engineering Materials, 132-136, 2017-2020, 1997.
  • Orlovskaya, N., Krivoshej, G., Babij, O., Ostrovoj, D., Effect of annealing on microstructure, phase composition and failure of Al2O3-ZrO2 ceramics at room temperature, J. Mat. Sci. Let. , 3, 106-109, 1996.
  • Barinov, S., Krylov, A., Shevchenko, V., Dusza, J., Rudnajova, E., Grigoriev, O., Orlovskaya, N., Effect of the size of SiC whiskers on the toughness of alumina based composite materials, Refract. Ind. Ceram., 38, 3-4. 96-99, 1997.
  • Grigoriev, O., Firstov, S., Babij, O., Orlovskaya, N., Homenko, G., Effect of zirconia (3mol% yttria) additive on mechanical properties and structure of alumina ceramics, J. Mat. Sci., 29, 17, 4633-4638, 1994.
  • Orlovskaya, N., Raw materials for the ceramics and glass industries. The economic situation in these sectors in the ex-Soviet Union (A retrospective outlook), Ceram. Inf., 30, 346, 27-28, 1995.
  • Gogotsi Y., Orlovskaya N., Goncharuk V. Study of mechanical properties of Al2O3-ZrO2-TiN system materials, Soviet powder metallurgy, 6, 84-86, 1993.
  • Gogotsi Yu., Grigoriev O., Orlovskaya N., Strengthened ceramics based on Al2O3, Refractories, 30, 11-12, 667-670, July 1990.
  • Dubok V., Kabanova M., Orlovskaya N. Effect vibro-treatment of powders on the sintering and mechanical properties ZrO2-based ceramics, Soviet powder metallurgy, 1990, N4, p.31-35.
  • Gogotsi Y., Grigoriev O., Orlovskaya N. Influence of batch preparation method on the structure and bend properties of ceramics in the Al2O3 – ZrO2 – Y2O3 systems, Refractories, 32, 6, 271-276, June 1991.
  • Kovalchenko A., Orlovskaya N. Differential approach to wear resistance of tool ceramics in the system Al2O3 – ZrO2(Y2O3), Soviet Journal of Friction and Wear, 13, 2, 82-85, 1992.
  • Orlovskaya N., Grigoriev O. Technical instruction for application of ceramics as cutting tools, IPMS AS of Ukraine, 1-38, 1993.
  • Orlovskaya N., Ponomarchuk S., Homenko G. Physical-mechanical properties and fracture of ceramics in the Al2O3 – ZrO2(Y2O3) system, Mechanics and physics of fracture of brittle materials, Kiev, IPMS AS Ukraine, 88-93, 1992.

(37) Conference papers

  • Aman*, A., Gentile**, R., Chen*, Y., Xu, Y., Huang, X., Orlovskaya, N., Numerical Simulation of Electrolyte-Supported Planar Button Solid Oxide Fuel Cells, the Proceedings of the 2012 COMSOL Conference in Boston, 2012.
  • Neutzler, J., Huang, X., Chen*, Y., Orlovskaya, N., High conductivity solid oxide electrolyte composite-laminates utilizing Scandia/Ceria co-doped Zirconia core with Yttria Stabilized Zirconia outer skins, Proceedings of Electrochemical Society, Fall, 2011.
  • Chen*, Y., Orlovskaya, N., Miller, N., Abernathy, H., Haynes, D., Tucker, D., Gemmen, R., La1.97Sr0.03Zr2O7 pyrochlore powder for advanced energy application, Advances in Science and Technology, Trans Tech Publications, Switzerland, 62, 56-60, 2010.
  • N. Orlovskaya, M. Lugovy, V. Slyunyayev, V. Subbotin, F. Liang, J. Gou, J. Kuebler, T. Graule, Boron Carbide/Boron Carbide – Carbon Nanofibers Laminates with Weak Interfaces, in: Boron Rich Solids: Sensors, Ultra High Temperature Ceramics, Thermoelectrics, Armor, Eds. N. Orlovskaya, M. Lugovy, Springer, 1-11, 2010.
  • M. Donohue**, C. Carpenter**, N. Orlovskaya, Vibrational Properties of Zr(Hf)B2-SiC UHTC Composites by Micro-Raman Spectroscopy, in: Boron Rich Solids: Sensors, Ultra High Temperature Ceramics, Thermoelectrics, Armor, Eds. N. Orlovskaya, M. Lugovy, Springer, 287-302, 2010.
  • Lukich*, S., Carpenter**, C., Orlovskaya, N., Temperature and stress assisted cubic to rhombohedral phase transition in Sc0.1Ce0.01ZrO2 electrolyte ceramics, 33rd International Conference on Advance Ceramics and Composites, Daytona Beach, 2009.
  • Orlovskaya, N., Sleiti, A., Naimaster, E., Bonadies, M., Kapat, J., and Johnson, C., Impact of temperature and porosity on Sc2O3-CeO2-ZrO2 Intermediate Temperature Solid Oxide Fuel Cell performance, 47th AIAA Aerospace Sciences Meeting, AIAA-2009-1207, Orlando, FL, 2009.
  • Gangopadhayay, S., Masunov, A.E., Mesit, J., Guha, R., Kapat, J., Orlovskaya, N., Multiscale simulations of vacancy diffusion coefficients in of Barium/Strontium Ferrate/Cobaltate (BSCF) as a promising material for solid oxide fuel cell, The Fourth International Conference on Multiscale Materials Modeling. October 27-31, 2008.
  • S. Ganopadhyay, T. Inerbaev, A. E. Masunov, D. Altilio*, N. Orlovskaya, J. Mesit, R. Guha, A. Sleiti, J. Kapat. Density functional theory and multiscale simulations combined with spectroscopic study of Barium/Strontium Ferrate/Cobaltate (BSCF) as a promising material forsolid oxide fuel cell (SOFC), 17th Conference on Current Trends on Computational Chemistry. October 31-November 1, 2008.
  • Ghosh, D.,Subhash, G., Orlovskaya, N., Scratch-induced deformation and residual stress in a zirconium diboride-silicon carbide composite, 32nd International Conference on Advance Ceramics and Composites, Daytona Beach, 2008.
  • Rosten, R., Swanson, M., Kuebler, J., Kapat, J., Orlovskaya, N., Characterization of (La0.9Sr0.1)0.95Cr0.85Mg0.1Ni0.05O3 perovskite ceramics for a perovskite related membrane reactor, in Solid-State Ionics, edited by E. Traversa, T. Armstrong, C. Masquelier, and Y. Sadaoka (Mater. Res. Soc. Symp. Proc.972, Warrendale, PA, 2007), 0972-AA02-07.
  • Zevalkink, A., Hunter, A., Swanson, M., Johnson, C., Kapat, J., Orlovskaya, N., Processing and characterization of Sc2O3-CeO2-ZrO2 electrolyte based Intermediate Temperature Solid Oxide Fuel Cells, in Solid-State Ionics, edited by E. Traversa, T. Armstrong, C. Masquelier, and Y. Sadaoka (Mater. Res. Soc. Symp. Proc.972, Warrendale, PA, 2007), 0972-AA03-04.
  • Tangtrakarn, N., Swanson, M., Moran, P., Kuebler, J., Kapat, J., Orlovskaya, N., Sintering behaviour and phase characterization of composite perovskite/fluorite ceramics for Intermediate temperature SOFCs and oxygen separation membranes, in Solid-State Ionics, edited by E. Traversa, T. Armstrong, C. Masquelier, and Y. Sadaoka (Mater. Res. Soc. Symp. Proc.972, Warrendale, PA, 2007), 0972-AA03-07.
  • Isupova, L., Obyskalova, E., Rogov, V., Tsybulya, S., Dovlitova, L., Burgina, E., Ischenko, A., Zaikovskii, Sadykov, V., Orlovskaya, N., Doped ceria-LaMeO3 (Me=Mn, Fe, Co) nanocomposites: synthesis via mechanochemical activation route and properties, in Generation, Storage and Fuel Cells, edited by Anne Dillon, Charles Olk, Constantina Filiou, Jim Ohi (Mater. Res. Soc. Symp. Proc. 885, Warrendale, PA, 2006), 0885-A03-04.1.
  • Sadykov, V., Frolova-Borchert, Y., Alikina, G., Lukashevich, A., Bunina, R., Zabolotnaya, G., Mezentseva, N., Moroz, E., Rogov, V., Zaikovskii, V., Ishchenko, A., Uvarov, N., Zyryanov, V.V., Orlovskaya, N., One-pot synthesis of mixed ionic-electronic conducting nanocomposites comprised of fluorite-like and perovskite-like phases as catalytic materials for SOFC, Nanoparticles and Nanostructures in Sensors and Catalysis, edited by C.-J. Zhong, N. A. Kotov, W. Daniell, F. P. Zamborini, (Mater. Res. Soc. Symp. Proc. 900E, Warrendale, PA, 2006), 0900-O10-08.1.
  • Coratolo, A., Orlovskaya, N., Johnson, C., Gemmen, R., Structural evolution of La0.9Sr0.1Cr0.9Co0.1O3 thin films for SOFCs and catalysis, Nanoparticles and Nanostructures in Sensors and Catalysis, edited by Chuan-Jian Zhong, Nicholas A. Kotov, Wayne Daniell, Francis P. Zamborini (Mater. Res. Soc. Symp. Proc. 900E, Warrendale, PA, 2006), 0900-O06-27.1.
  • Johnson, C., Gemmen, R., Poston, J., Schaeffer, C., Orlovskaya, N., Fegely, L., Rawn, C., Perovskite based protective coatings for Solid Oxide Fuel Cell metallic interconnects, Proceeding of Ninth International Meeting of Solid Oxide Fuel Cells, Quebec City, 1842-1850, 2005.
  • Orlovskaya, N., Nicholls, A., Yarmolenko, S., Sankar, J., Johnson, C., Gemmen, R., Microstructural characterization of La-Cr-O thin films deposited by magnetron sputtering on the stainless steel interconnect materials for SOFC application, in a book ”Fuel Cells: State and Prospectives ”, Eds. Sammes, N., Vasylyev, O.,  Kluwer Academic Publishers, 355-371, 2005.
  • Orlovskaya, N., Steinmetz, D., Raman diagnostics of LaCoO3 based perovskites, in book “Mixed ionic electronic conducting perovskites for advanced energy systems”, Eds. Orlovskaya, N., and Browning, N., Kluwer Academic Publishers, p. 37-49, 2004.
  • Wiik, K., Fossdal, A., Sagdahl, L., Lein, H., Menon, M., Faaland, S., Waernhus, I., Orlovskaya, N., Einarsrud, M.-A., Grande, T., LaFeO3 and LaCoO3 Based Perovskites: Preparation and Properties of Dense Oxygen Permeable Membranes, in book “Mixed ionic electronic conducting perovskites for advanced energy systems”, Eds. Orlovskaya, N., and Browning, N., Kluwer Academic Publishers, p.72-82, 2004.
  • Orlovskaya, N., Adams, J., Chheda, M., Shih, J., Yarmolenko, S., Sankar, J., Lugovy, M., Subbotin, V., Boron carbide – silicon carbide laminate ceramics for ballistic protection, Proceedings of IMECE’03, 2003 ASME International Mechanical Engineering Congress & Exposition, Washington, D.C., November 16-21, 2003.
  • Orlovskaya, N., Lugovy, M., Subbotin, V., Radchenko, O., Adams, J., Chheda, M., Shih, J., Sankar, J., Yarmolenko, S., Design and manufacturing B4C-SiC layered ceramics for armor applications, in the book “Ceramic Armor and Armor Systems” (Ceramic Transactions, Volume 151) 2003, pp. 59-70.
  • Orlovskaya, N., Kuebler, J., Subbotin, V., Lugovy, M., Tough ceramic laminates by design of residual stresses, Advanced Fibers, Plastics, Laminates and Composites, edited by F. T. Wallenberger, N. E. Weston, R. Ford, R. P. Wool, K. Chawla, (Mater. Res. Soc. Symp. Proc. 702, Warrendale, PA, 2002), U8.7.1.
  • Orlovskaya, N., Gogotsi, Y., Nicholls, A., Twins in LaCoO3 based ferroic perovskites, Proceedings of 7th Int. Symp. On Solid Oxide Fuel Cells, Eds. Yokokawa, H., Singhal, S.C., 2001-16, 624-632, 2001.
  • Lugovoj, N., Orlovskaya, N., Berroth, K., Kuebler, J., Analysis of layered composite with crack deflection controlled by layer thickness, Proceedings of the NATO ASI “Functional gradient materials and surface layers prepared by fine particle technology”, Kiev, Ukraine, 18-28 June, 2000, Ed. By M.-I. Baraton and I. Uvarova, NATO Science Series, II, Mathematics, Physics and Chemistry, 16, Kluwer Academic Publishers, 273-280, 2001.
  • Yaroshenko, V., Orlovskaya, N., Einarsrud, M.-A., Kovylayev, V., Processing of multilayered Si3N4-TiN hot-pressed ceramic composites /Proceedings of NATO ARW “Multilayered and fibre-reinforced composites: Problems and Prospects”, Kluwer, Dordrech, 285-295, 1998.
  • Orlovskaya N., Kovylayev V. Boron suboxide – new sintering additive for silicon nitride ceramics, Proceedings of Third International Conference on Composites Engineering, Ed. by D. Hui, 21-26 of July, 1996, New Orleans, LA, USA, 461-462, 1996.
  • Orlovskaya N., Kovylayev V., Firstov S. Strength, fracture toughness, phase composition and structure of Al2O3 – ZrO2  and Al2O3 – ZrO2 -TiN ceramics after annealing, Proceedings of Third International Conference on Composites Engineering, Ed. by D. Hui, 21-26 of July, 1996, New Orleans, LA, USA, 647-648, 1996.
  • Orlovskaya, N., Kovylyaev, V., Red’ko, V., Phase transformation effect on Al2O3 – ZrO2(Y2O3) – TiN high-temperature strength, in “Fourth Euro-ceramics”, 3, Ed. by S.Meriani and V.Sergo, Faenza, Italy, 301-306, 1995.
  • Grigoriev O., Orlovskaya N., Gogotsi Yu., Yaroshenko V., Homenko G. Dispersion-strengthened and transformation-toughened Al2O3-based ceramics / Ceramic today-tomorrow’s ceramics: Proceedings of the 7th International Meeting on Modern Ceramics Technologies ( 7th Cimtec World Ceramics Congress ), Montecatini Terme, Italy, Elsevier, 2821-2830, 1991.
  • Grigoriev O., Gogotsi Y., Orlovskaya N., Homenko G.  Effect of TiN on the mechanical properties of Al2O3 – ZrO2 ceramics  / Euro-Ceramics II, V.2, Structural ceramics and composites, ed. Ziegler G., Hausner H., Deutsche Keramische Gesellschafte, 1413-1417, 1993.
  • Krylov A., Barinov S., Ivanov D., Mindlina N., Dusza J., Rudnayova E., Orlovskaya N. Influence of whisker size on mechanical properties of SiC whisker reinforced alumina, Proceedings of the 8th International conference on Powder Metallurgy in CSFR, 7-9 October 1992, Piestany, 2, 55-61, 1992.
  • Babij O., Orlovskaya N., Andreeva M., Influence ZrO2 on mechanical properies and structure Al2O3 ceramics, Proceedings of the Conference: Modern Questions of Materials Science, Kiev, IPMS AS Ukraine, 81-88, 1990.
  • Ponomarchuk S., Orlovskaya N. Production of the Al2O3-ZrO2-Y2O3 ceramic powders by crio-chemical method, Proceedings of the Conference: Modern problems of powder metallurgy, ceramics and composites; Kiev, IPMS AS Ukraine, 80-83, 1990.
  • Gogotsi Yu., Michaylenko A., Orlovskaya N., Technology of production of kriochemical alumina-based powders, Proceedings of the Conference: Physical-chemical and technological characteristics ultrafined materials; Kiev, IPMS AS Ukraine, 46-48, 1989.
  • Gogotsi Yu., Orlovskaya N., Effect of composition on the strength and toughness of Al2O3 – ZrO2 – TiN ceramics, Proceedings of the Conference: Modern problems of physical materials of science; Kiev, IPMS AS Ukraine, 106-111, 1990.
  • Grigoriev O., Gogotsi Yu., Orlovskaya N. Hot-pressed materials in Al2O3 – ZrO2 – TiN system,  Proceeding of 17 Soviet Union Powder Metallurgy Conference, Sverdlovsk, 39-40, 1989.

(5) Patents

  • N. Orlovskaya, Z. Xie, R. Blair and D. Cullen, “Mechanochemical synthesis and applications of new IrB2 and IrB powders”, invention disclosure, submitted, 2014.
  • Robayo*, M., Beaman**, B., Hughes**, B., Delose**, B., Orlovskaya, N., Chen, R.-H., Perovskite catalysts enhanced combustion porous media, Invention Disclosure, submitted on October 29, 2013.
  • Orlovskaya N.,Terracciano A., Dasgupta A., “Liquid Fueled Porous Combustion Apparatus and Method,” United States of America Patent 1335P047, 2014.
  • Orlovskaya, N., Xie*, Z., Blair, R.G., Mechanochemical synthesis of hexagonal OsB2, US Patent, filed on 1/16/2014, US 14/157,216.
  • Gogotsi Yu., Yaroshenko V., Grigoriev O., Orlovskaya N. Patent N 4903213 “Batch for the ceramic tool materials on Al2O3-based ceramics”, 22.01.92, prior.21.01.91, USSR.